(Authorized Representative)

Product Detail

HDPE Pipe (High-Density Polyethylene)

In order to further support the requirements of esteemed customers in water and irrigation sector, Jindal SAW Ltd has set up the HDPE Pipe plant in Araji, near Tiranga Hill, Bhilwara, Rajasthan India. The size range of Pipes is DN 75 mm to DN 280 mm. This state-of-the-art plant was commissioned in the year 2019.

Jindal Saw Limited is a large scale trans-regional & Multi-industrial enterprise holding a commanding position in India's tubular market. In 1984, Jindal Saw Limited became the first company to manufacture Submerged Arc Welded (SAW) pipes using the internationally aclaimed U-O-E technology.

Jindal Saw has integrated facility based at multiple locations in India & abroad where advance quality industrial pipes are manufactured, DI Pipes for water transportation; Large Diameter SAW & Spiral pipe for water, Oil & Gas transportation, seamless pipe & tube for industrial applications as well as HDPE pipes for irrigation & portable drinking purpose.

Size Range: DN 75 mm to DN 280 mm

Conforming Standard: IS: 4984 - 2016

WHY HDPE PIPES?

HDPE pipes are used widely in portable water supply and distribution, sewerage and drainage, irrigation and distribution

  • Resistance to chemicals, corrosion and impacts

  • Hydraulically smooth

  • Stiffness, Hardness, Strength

  • Flexible, lightweight and coil able

  • Maintain the odour and taste of water

  • Easy to install

  • Low maintenance cost

  • Long life span

  • Environmentally friendly

FACILITIES
  • Size range 20 to 315 mm

  • Pressure rating From PN4 To PN10

  • State of art with high output extrusion lines

  • Tracer wire compatibility

  • Close-to-demand distribution network catering

  • Best in class Manufacturing Facility, with advanced equipment & practices

  • In –house complete laboratory testing facilities ensuring BIS compliance.

KEY STRENGTH
  • Strong foothold in India and overseas Pipe market

  • Strong and highly experienced Management and Production Team

  • Advanced & efficient equipment & technology

  • Using 100% virgin material

PIPE SPECIFICATIONS (WALL THICKNESS CHART FOR HDPE PIPE AS PER IS: 4984:2016)

The wall thickness are calculated based on maximum allowable operating pressure at 27 °C
*( All dimension are in mm)

SDR SDR 41 SDR 33 SDR 26 SDR 21
Nominal Pressure , PN in bar
PE-63 PN 2 PN 2.5 PN 3.2 PN 4
PE-80 PN 2.5 PN 3.2 PN 4 PN 5
PE-100 PN 3 PN 4 PN 5 PN 6
Nominal Dia. (OD) Mean Outside Diameter Wall Thickness
Min Max Min Max Min Max Min Max Min Max
20 20.00 20.20
25 25.00 25.20
32 32.00 32.00
40 40.00 40.40 1.9 2.2
50 50.00 50.40 2.0 2.3 2.4 2.7
63 63.00 60.40 2.5 2.9 3.0 3.4
75 75.00 75.50 1.9 2.2 2.3 2.6 2.9 3.3 3.6 4.1
90 90.00 90.60 2.2 2.5 2.8 3.2 3.5 4.0 4.3 4.8
110 110.00 110.70 2.7 3.1 3.4 3.8 4.3 4.8 5.9 6.6
125 125.00 125.80 3.1 3.5 3.8 4.3 4.8 5.4 6.0 6.7
140 140.00 140.90 3.5 4.0 4.3 4.8 5.4 6.0 6.7 7.5
160 160.00 161.00 3.9 4.4 4.9 5.5 6.2 6.9 7.7 8.6
180 180.00 181.00 4.4 4.9 5.5 6.2 7.0 7.8 8.6 9.6
200 200.00 201.20 4.9 5.5 6.1 6.8 7.7 8.6 9.6 10.7
225 225.00 226.40 5.5 6.2 6.9 7.7 8.7 9.7 10.8 12.0
250 250.00 251.50 6.1 6.8 7.6 8.5 9.7 10.8 12.0 13.3
280 280.00 281.70 6.9 7.7 8.5 9.5 10.8 12.0 13.4 14.8
315 315.00 316.90 7.7 8.6 9.6 10.7 12.2 13.5 15.0 16.6
TECHNICAL SPECIFICATIONS (WALL THICKNESS CHART FOR HDPE PIPE AS PER IS: 4984:2016)
SDR SDR 17 SDR 13.6 SDR 11
Nominal Pressure , PN in bar
PE-63 PN 5 PN 6 PN 8
PE-80 PN 6 PN 8 PN 10
PE-100 PN 8 PN 10
Nominal Dia. (OD) Mean Outside Diameter Wall Thickness
Min Max Min Max Min Max Min Max
20 20.00 20.20 1.9 2.2
25 25.00 25.20 1.9 2.2 2.3 2.6
32 32.00 32.00 1.9 2.2 2.4 2.7 2.9 3.3
40 40.00 40.40 2.4 2.7 3.0 3.4 3.7 4.2
50 50.00 50.40 3.0 3.4 3.7 4.2 4.7 5.2
63 63.00 63.40 3.7 4.2 4.7 5.3 5.8 6.5
75 75.00 75.50 4.5 5.1 5.6 6.3 6.9 7.7
90 90.00 90.60 5.3 5.9 6.7 7.5 8.2 9.1
110 110.00 110.70 6.5 7.3 8.1 9.0 10.0 11.1
125 125.00 125.80 7.4 8.2 9.2 10.2 11.4 12.7
140 140.00 140.90 8.3 9.2 10.3 11.4 12.8 14.2
160 160.00 161.00 9.5 10.6 11.8 13.1 14.6 16.2
180 180.00 181.10 10.6 11.8 13.3 14.7 16.4 18.1
200 200.00 201.20 11.8 13.1 14.7 16.3 18.2 20.1
225 225.00 226.40 13.3 14.7 16.6 18.4 20.5 22.7
250 250.00 251.50 14.7 16.3 18.4 20.3 22.8 25.2
280 280.00 281.70 16.5 18.3 20.6 22.8 25.5 28.2
315 315.00 316.90 18.6 20.6 23.2 25.6 28.7 31.7
LAB FACILITIES

Hydro Static Pressure Testing M/C , 70 kg/cm2, 5 stations

  • Hot water bath

  • Room temp bath

  • Hot air circulation oven

  • Carbon black content tester

  • Carbon black dispersion tester

  • Melt flow index tester

  • Hydraulic press 20 MT

  • Universal Testing M/C, capacity -3000 kgf

  • OIT tester (Oxidation index Time) with computer interface

  • Contour cutter M/C

  • Electronic weighing balance (accuracy 0.1 mg)

Enquire Now